Quantum DXi6900 User Manual page 336

Chapter 9: Configuration
System
3. Click Test.
SSL
The SSL page allows you to enable or disable SSL on the DXi6900. You can also install a new SSL
certificate to replace the Quantum default SSL certificate.
To access the SSL page, on the Security page, click the SSL tab (see
Figure 214: SSL Page
Additional Information
If you enable SSL, see
l
about Web browser settings.
SSL is automatically enabled by default after a fresh installation of DXi software.
l
Tasks
Use the SSL page to perform the following tasks:
l
Enable or disable SSL on the DXi6900 (see
l
Install a new SSL certificate (see
l
Enabling SSL
SSL (Secure Sockets Layer) is a protocol that provides security and privacy over the Internet by negotiating
encryption keys before transmitting data between a client and a server.
To establish a secure connection, the DXi6900 must have an encryption key assigned to it by a Certification
Authority in the form of a certificate file, private key file, and pass phrase. After you install these components,
you can establish a secure connection using the SSL protocol. The DXi6900 comes with a Quantum default
SSL certificate.
Quantum DXi6900 User's Guide
Server Authentication Warnings on the next page
Enabling SSL
Installing an SSL Certificate on the next
Figure 214 below).
for important information
below).
page).
336