Windows Domain - Quantum DXi6900 User Manual

Chapter 9: Configuration
NAS Configuration

Windows Domain

The Windows Domain page allows you to join the DXi6900 to a Windows workgroup or a Windows
domain using SMB. To use a NAS share configured for the CIFS/SMB protocol on a Windows network, you
must first join the DXi6900 to a workgroup or a domain. After you join the DXi6900 to a workgroup or a
domain, CIFS/SMB shares are available for use on the Windows network.
To access the Windows Domain page, on the NAS page, click the Windows Domain tab (see
below).
Figure 135: Windows Domain Page
Tasks
Use the Windows Domain page to perform the following tasks:
Join the DXi6900 to a Windows workgroup (see
l
Join the DXi6900 to a Windows domain (see
l
Remove the DXi6900 from a Windows workgroup or domain (see
l
on page 214).
Joining a Windows Workgroup
Join a Windows workgroup to add the DXi6900 to a workgroup on a Windows network. After you join a
workgroup, CIFS/SMB shares are available for use on the Windows network.
To join a Windows workgroup:
Quantum DXi6900 User's Guide
Joining a Windows Workgroup
Joining a Windows Domain on the next
Disjoining a Workgroup or Domain
Figure 135
below).
page).
212