Quantum DXi6900 User Manual page 360

Chapter 10: Utilities
Diagnostics
Figure 231: Status Page
The Status page displays the following information about the most recently run test for each healthcheck:
Healthcheck Name
State
Started
Finished
Status
To enable or disable a healthcheck:
1. Select the healthcheck and click Edit.
The Edit Healthcheck page displays (see
Figure 232: Edit Healthcheck Page
2. Select the check box to enable the healthcheck.
Or clear the check box to disable the healthcheck.
3. Click Apply.
Note: When healthchecks are run (manually or scheduled), only enabled healthchecks are run.
Quantum DXi6900 User's Guide
The name of the healthcheck.
The state of the healthcheck (enabled or disabled).
The time the healthcheck started
The time the healthcheck ended.
The status of the healthcheck (Success or Failed).
Note: If running a healthcheck results in the Contact Support status, contact
Quantum Customer Support for further assistance.
Figure 232 below).
360