Quantum DXi6900 User Manual page 244

Chapter 9: Configuration
VTL Configuration
Figure 155: DXi6900 G2/DXi6900-S Targets Page
The Targets page displays the Target Port and WWPN for the currently configured targets. The
Backpanel Locations section displays a graphical representation of the Fibre Channel and Ethernet ports
as they appear on the rear of the system.
Note: A mapped (green) status indicates the host is currently logged on to one or more Fibre Channel
target ports.
Select one or more targets and click Reset Target(s) to initiate a Fibre Channel reset on the selected ports.
A reset causes the ports to go through LIP (Loop Initialization Protocol).
Target Usage
Use the Target Usage page to view current target and device mappings for the DXi6900.
To access the Target Usage page, on the Host Access page, click the Target Usage tab (see
on the next page and Figure 157 on page
Quantum DXi6900 User's Guide
246).
Figure 156
244