Table of Contents
Advertisement
Chapter 1: Basic Operations
Turning On and Shutting Down the System
Items
Button/LED
3
Ethernet link rate (green)
4
Ethernet activity (green)
5
Service action allowed (blue)
6
Service action required (amber)
7
Power (green)
8
Seven segment display (green)
9
Standby power (green)
10
DC enabled (green)
11
Service action allowed (blue)
12
Service action required (amber)
13
AC enabled (green)
14
Power switch
Turning On and Shutting Down the System
To turn on or shut down the DXi6900-S, refer to the following sections:
Turning On the DXi6900-S on the next page
l
Turning Off the DXi6900-S on page 21
l
Quantum DXi6900-S Field Service Manual
Description
Solid - port speed 1000MB/sec.
Off - port speed 10/100MB/sec.
Solid - link established.
Blinking - indicates port activity.
Solid - safe for Quantum field service. to remove ESM
from slot.
Solid - ESM has failed and requires attention.
Note: Fault light will be on during power up and
will turn off after self-test sequence completes.
Solid - power is being applied to the ESM.
Displays tray ID and error code. (Displays 00 when the
Array module is operating normally.)
Solid - main DC power is off and 5V standby power is
on.
Solid - DC power rails are within specified limits.
Solid - safe for Quantum field service. to remove power
supply from slot.
Solid - power supply has failed and requires attention.
Solid - power is being applied to the power supply and
the power switch is on.
Module power switch.
19
Advertisement
Table of Contents
