Ring Tone Pattern Selection - Panasonic KX-TDA100 Features Manual

Ring Tone Pattern Selection

Description
A ring tone pattern can be selected for each incoming call type on a Ring Tone Pattern Table
basis, which can be assigned for each extension.
[Patterns]
Telephone Type
PT
SLT/T1-OPX
DWX
*: S-Double can be assigned for call back ring only.
[Ring Tone Patterns for a PT]
Single
(Option 1)
Double
(Option 2)
Triple
S-Double
[Programming Example of Ring Tone Pattern Table]
There are a specified number of programmable tables each of which allows the assignment
of ring tone patterns for the following incoming call types:
For trunk calls (including trunk call hold recalls) and doorphone calls, select ring tone patterns
on a trunk group or a doorphone port basis.
Intercom
Table
Call/Hold
No.
Recall
1 Double
2 Single
:
Each extension can select one of the tables.
Single
Cannot be changed. Refer to the [Ring Tone
Patterns for a PT] below.
Each pattern and its ringing cycle can be changed.
Can set the ringing pattern on the DWX based on the ring tone pattern
from the PBX.
1 280 ms
Trunk Call/Hold
Recall
TRG1 TRG2
Single
Double
: : :
Ring Tone Pattern
Double Triple
Doorphone Call
... Port 1 Port 2
Single
Double
: : :
1.1 Incoming Call Features
S-Double* Option-1 Option-2
Same as
Single
Sens Alar Call
or m Back
...
: : :
Feature Guide
Same as
Double
LCS
: :
35