Setting The Feed Dog; Setting The Feed Dog Position - Dürkopp Adler 867-M PREMIUM Service Instructions Manual

Setting the feed dog

8
The position and the movement of the feed dog and needle bar have to be
coordinated such that the needle pierces exactly in the center of the nee-
dle hole of the feed dog.
Order
First, check the following setting:

8.1 Setting the feed dog position

Proper setting
When the stitch length is set to 0, the needle pierces exactly in the center
of the needle hole and the feed dog is exactly in the center of the throat
plate cutout, both sideways and in the sewing direction.
Information
For minimal deviations, it suffices to move the feed dog on the carrier
( p. 36).
Service Instructions 867-M PREMIUM - 03.0 - 05/2017
Setting the feed dog
WARNING
Risk of injury from moving parts!
Crushing possible.
Move the machine into the service routine before
setting the feed dog.
• Needle bar linkage ( p. 43)
• A straight and undamaged needle has been inserted ( Operating
Instructions)
35