Removing And Placing The Valve Cover - Dürkopp Adler 867-M PREMIUM Service Instructions Manual

Working basis
3.4.4
Fig. 8: Removing and placing the valve cover
(1) - Valve cover
Important
When removing and positioning the valve cover, be sure not to pull off any
cables.
Removing the valve cover
To remove the valve cover:
1. Loosen the screws (2).
2. Remove the valve cover (1).
Placing the valve cover
To place the valve cover:
1. Place the valve cover (1).
2. Tighten the screws (2).
Service Instructions 867-M PREMIUM - 03.0 - 05/2017

Removing and placing the valve cover

①
②
(2) - Screws
19