Dürkopp Adler 867-M PREMIUM Service Instructions Manual page 140

Fig. 107: Data Transfer submenu
(1) - Connection
2. Call up the Service > Data Transfer > Programs menu item.
3. Press the OK button to confirm the selection.
4. Use the
5. Press the OK key to confirm your selection.
 The following warning message appears:
Fig. 108: Data loss warning message
6. Select a program with the
7. Press the OK button to confirm the selection.
 A check mark in front of the program name shows that it has been
8. Repeat the selection for all the desired programs or select all programs
9. Press the
10. Select the SelectAll option with the
138
①
▲/▼ buttons to choose between the options Load from USB
or Store to USB.
Erase USB-Stick
All Data will lost
selected.
at the same time (see next step).
button; the selection Destination, Select All,
►
Deselect All appears.
(2) - Control
+
OK ESC
▲/▼
buttons.
▲/▼
buttons.
Service Instructions 867-M PREMIUM - 03.0 - 05/2017
Programming
②