2. Hold button F pressed and at the same time switch on the machine at
The display shows the this mask:
3. Press all the buttons on the control panel in any order except for ESC.
If a button is functional, then the corresponding box on the display
4. Press the ESC button to end.
If all the buttons are functional, the display shows the following status
5. Press the OK button.
If one or several buttons are not functional:
The display shows the status message
160
the main switch.
will be filled in (highlighted brightly).
If the key is not functional, then the box stays empty.
message:
The control panel has to be replaced.
Keys
...
NOT OK!
Service Instructions 867-M PREMIUM - 03.0 - 05/2017
Troubleshooting