Dürkopp Adler 867-M PREMIUM Service Instructions Manual page 142

Fig. 110: Perform software update
(1) - Connection
3. Switch on the machine at the main switch.
 The machine automatically starts the software transfer. During the
Fig. 111: Perform software update
(3) - Firmware version
 As soon as the software update is finished, the display will also show
Fig. 112: Perform software update
(3) – Firmware version
4. Wait until the machine has started and is showing the Manual mode
140
①
transfer, the display only shows the firmware version (3) of the control
panel on the left.
③
the software version (4) of the machine on the right.
③
or Automatic mode.
(2) - Control
OP3000
A03
2014-11-27
OP3000 867
A03 V03.94
2014-11-27 2017-01-19
(4) - Software version
Service Instructions 867-M PREMIUM - 03.0 - 05/2017
Programming
②
④