Locking The Machine In Place; Assembling The Handwheel Flange - Dürkopp Adler 867-M PREMIUM Service Instructions Manual

To place the cover:
1. Position the cover (2) at the side.
2. Tighten the screws (1).

19.3.5 Locking the machine in place

Fig. 86: Locking the machine in place
(1) - Locking peg
To lock the machine in place:
1. Lock the machine in place using the locking peg (1) (Ø 3 mm).
 The needle is in the top dead center position.

19.3.6 Assembling the handwheel flange

Fig. 87: Assembling the handwheel flange
(1) - Handwheel flange marking
(2) - Cover marking
98
①
①
②
③
(3) - Threaded pins
(4) - Handwheel flange
Service Instructions 867-M PREMIUM - 03.0 - 05/2017
Integrated motor
④
o