Machine Configuration (Machine Config.) Submenu - Dürkopp Adler 867-M PREMIUM Service Instructions Manual

20.5 Machine configuration (Machine config.) submenu

Settings on the machine that apply to all programs can be made here.
The parameters are explained in more detail in the subchapters.
The menu is divided into the following submenus:
Parameter
Thread Trim
Thread Clamp
Speed
Stop Positions
Foot
Thr.Tens.
Stroke
Stitchlen.
Bobbin
Holding Force
Pedal
NeedleCooling
CenterGuide
EdgeGuide
FabricThickness
SpeedCorr
LightBarrier
Mode Seg.Size
Threading
106
Explanation
Thread cutter
Thread clamp
Speed
Stop positions
Sewing foot
Needle thread tension
Sewing foot stroke
Stitch length
Bobbin
Motor holding force
Pedal
Needle cooling
Seam center guide
Edge guide
Material thickness detection
Correcting effects of high speed
Light barrier
Segment length
Threading mode
Service Instructions 867-M PREMIUM - 03.0 - 05/2017
Programming
Reference
 p. 107
 p. 108
 p. 110
 p. 110
 p. 110
 p. 111
 p. 112
 p. 113
 p. 113
 p. 113
 p. 114
 p. 115
 p. 115
 p. 116
 p. 116
 p. 117
 p. 117
 p. 118
 p. 118