Setting The Sewing Foot Stroke (Stroke) Parameter - Dürkopp Adler 867-M PREMIUM Service Instructions Manual

20.5.7 Setting the sewing foot stroke (Stroke) parameter

Various settings can be made for the sewing foot stroke. The possibilities
are explained in more detail in the table.
Menu item
2nd Tension
StitchOFF
Automatic
Speed
Limitati
112
NOTICE
Property damage may occur!
In the case of an excessive sewing foot stroke, the machine may be
damaged and so also the sewing result may not be satisfactory.
If the machine is at the second sewing foot stroke height, do not
allow it to sew at an excessive speed.
Setting options
If the second sewing foot stroke is switched on, the second needle
thread tension is automatically activated (except in the case of
material thickness detection).
(Value range ON/OFF)
Number of stitches after which the second sewing foot stroke is
automatically deactivated.
(Value range 000 – 255)
Speed
Speed at which the second sewing foot stroke height is automati-
cally activated.
(Value range 0000 – 4000 [rpm], depending on subclass)
HP in Tack
nd
2 sewing foot stroke height is automatically activated, even in
bartack.
(Value range ON/OFF)
Speed
As from the set value of the Min Stroke for the sewing foot stroke,
the speed is reduced down to the desired value for the Max Stroke
for the sewing foot stroke.
(Value range 0050 – 3800 [rpm], depending on subclass)
Min Stroke
Sewing foot stroke at which the speed reduction is initiated.
(Value range 00.0 – 09.0)
Max Stroke
Sewing foot stroke at which the reduced speed is reached.
(Value range 00.0 – 09.0)
Service Instructions 867-M PREMIUM - 03.0 - 05/2017
Programming