Assembling The Stator - Dürkopp Adler 867-M PREMIUM Service Instructions Manual

19.3.2 Assembling the stator

Fig. 83: Assembling the stator
(1) - Stator with ring
(2) - Screws
To fit the stator:
1. Push the stator with ring (1) onto the shaft, paying attention to the ring
2. Fit the cover plate (3).
3. Evenly screw the screws (2) firmly in place so that a uniform gap exists
96
NOTICE
Property damage may occur!
The stator can be attracted by applying magnetic force.
Work carefully and in a controlled manner.
①
②
③
gap for the cable.
between the cover plate (3) and shaft.
(3) - Cover plate
Service Instructions 867-M PREMIUM - 03.0 - 05/2017
Integrated motor