Disassembling The Drive; Disassembling The Handwheel And Handwheel Flange; Removing The Cover - Dürkopp Adler 867-M PREMIUM Service Instructions Manual

19.2 Disassembling the drive

19.2.1 Disassembling the handwheel and handwheel flange

Fig. 77: Disassembling the handwheel and handwheel flange
(1) - Handwheel
(2) - Screws
To disassemble the handwheel and handwheel flange:
1. Loosen all 3 screws (2) on the handwheel (1).
2. Loosen all threaded pins (3) and remove the handwheel flange (4).

19.2.2 Removing the cover

Fig. 78: Removing the cover
(1) - Screws
(2) - Cover
92
①
②
①
②
④
③
(3) - Threaded pins
(4) - Handwheel flange
①
③
(3) - Handwheel flange
Service Instructions 867-M PREMIUM - 03.0 - 05/2017
Integrated motor