Assembling The Handwheel - Dürkopp Adler 867-M PREMIUM Service Instructions Manual

Integrated motor
To assemble the handwheel flange:
1. Attach the handwheel flange (4) so that the two markings (1), (2) are
2. Screw both threaded pins (3) firmly in place.

19.3.7 Assembling the handwheel

Fig. 88: Assembling the handwheel
(1) - Handwheel
To assemble the handwheel:
1. Attach the handwheel (1) and tighten all 3 screws (2).
2. Set the reference position via the control; see  DAC comfort Operating
Service Instructions 867-M PREMIUM - 03.0 - 05/2017
in line.
In doing so, make sure that there is a distance of approx. 0.5 - 1 mm
between the handwheel flange (4) and the cover plate.
①
②
Manual.
(2) - Screws
99