Setting The Handwheel Scale - Dürkopp Adler 867-M PREMIUM Service Instructions Manual

Setting the handwheel scale

4
Proper setting
1. Lock the machine in place at position 2 ( p. 24).
 The handwheel is at position 0°.
Fig. 16: Setting the handwheel scale
(1) - Handwheel
(2) - Washer
To set the handwheel scale:
1. Lock the machine in place ( p. 24).
2. Remove the handwheel (1).
3. Loosen and turn the washer (2).
Important
The marking (3) on the washer (2) marks the position 0°.
4. Tighten the washer (2)
5. Fit the handwheel (1).
Service Instructions 867-M PREMIUM - 03.0 - 05/2017
Setting the handwheel scale
If a different degree number is next to the marking, then you will have
to reset the graduated scale.
① ② ③
(3) - Marking
27