Dürkopp Adler 867-M PREMIUM Service Instructions Manual page 85

Short thread cutter
Setting point in time for cutting
To set the point in time for cutting:
1. Loosen the threaded pins (6) on the control cam (5).
2. Move the control cam (5) towards the clamping ring (4) until it makes
3. Tighten the threaded pins (6) on the control cam (5).
4. Check and, if necessary, correct the cutting position.
Service Instructions 867-M PREMIUM - 03.0 - 05/2017
contact and correct the position of the control cam (5).
83