Winder
Setting the winder run
Fig. 55: Setting the winder (4)
(8) - Block
(10) - Winder wheel
(12) - Threaded pin
To set the winder run:
13. Loosen the threaded pin (13).
14. Set the switch cam (14) such that it is just contacting the leaf spring (15)
15. Set the switch cam (14) such that the winder lever (3) has no axial play.
16. Tighten the threaded pin (13).
Installing the winder
Fig. 56: Setting the winder (5)
(1) - Screws
To install the winder:
17. Place the winder on the machine arm.
18. Tighten the screws (1).
Service Instructions 867-M PREMIUM - 03.0 - 05/2017
⑧
⑩
⑫
⑬
when the block (8) has engaged in the locking disk.
①
⑭
(13) - Threaded pin
(14) - Switch cam
(15) - Leaf spring
⑭
⑮
67