Dürkopp Adler 867-M PREMIUM Service Instructions Manual page 164

Characteristics
• sewing motor (DA direct drive) integrated into the machine head with
• Control DAC comfort with OP3000 control panel
• Actuators without compressed air
• large (L) or extra-large (XXL) vertical hook
• Electromagnetic thread cutter
• programmable setting of the stitch length via stepper motor (max. 12 mm)
• programmable adjustment of the alternating sewing feet via stepper
• Material thickness detection with programmable functions (sewing
• programmable sewing foot pressure via stepper motor (in combination
• Sewing foot lift controlled by stepper motor (max. 20 mm, same actua-
• programmable thread tension (electromagnetically) with speed com-
• Electronic handwheel (ENP 10-1)
• integrated winder with winding assistant
• Safety snap-on coupling prevents any misadjustment or damage to the
• automatic wick lubrication with an inspection glass housed in the arm
• all subclasses with 6 push buttons, additional button element can be
• Use of CTB bobbins in combination with cylindrical braking and lifting
• Integrated LED sewing lamp including power supply and dimming function
• intuitive control software with graphical user interface
• up to 999 different seam programs supporting a maximum of 30 individual
162
max. speed of 3,800 rpm (depending on the hook size used)
motor (max. 9mm)
speed, sewing foot pressure, sewing foot stroke, and thread tension)
with compression spring); depending on material thickness detection
tor as the one used for the sewing foot pressure)
pensation; also depending on material thickness detection
hook in the event of a thread jamming
for lubricating the machine and the hook (including low oil level warning
light)
assigned push button functions
spring, hook covers with inspection glasses
seam sections each. Sequential mode for a maximum of 9 interlinked
seam programs
Service Instructions 867-M PREMIUM - 03.0 - 05/2017
Technical data