Data Transfer (Data Transfer) Submenu; Setting The All Data (All Data) Parameter - Dürkopp Adler 867-M PREMIUM Service Instructions Manual

3. Select the desired option – see the table – with the
4. Press the OK button to confirm the selection.
 The reset is carried out without any further query and without a con-
Options for resetting the data
Menu item
Reset data
Reset programs All created programs are erased.
Reset Calibr.
Reset all

20.10 Data transfer (Data Transfer) submenu

Use this submenu to transfer data between the machine – or more precisely
the control – and a USB key. Various options are available for the data trans-
fer, which are explained in the subchapters.
The menu is divided into the following submenus:
Parameter
All Data
Only Data
Programs
Important
It is permitted only to use USB keys bought from Dürkopp Adler.

20.10.1 Setting the All data (All Data) parameter

All data – i.e. parameter settings, programs, and calibration values – are
transfered to the USB key or the control.
To transfer all data:
1. Plug the USB key into the socket (1) on the control (2).
134
firmation message.
Setting options
All parameters are reset to the factory settings; this does not apply
to the programs and the calibration values.
All calibration values are reset to the factory settings.
All parameters, programs, and calibration values are reset to the
factory settings.
Explanation
All data
Only data
Programs
Service Instructions 867-M PREMIUM - 03.0 - 05/2017
Programming
▲/▼ buttons.
Reference
 p. 134
 p. 136
 p. 137