Setting The Hook Thread Guide - Dürkopp Adler 867-M PREMIUM Service Instructions Manual

14.3 Setting the hook thread guide

Fig. 57: Setting the hook thread guide
(1) - Screw
The position of the hook thread guide determines how the hook thread is
wound onto the bobbin.
Proper setting
The hook thread is wound on evenly over the entire width of the bobbin.
To set the bobbin thread guide:
1. Loosen the screw (1).
2. Turn the hook thread guide (2):
68
①
• To the front: The hook thread will be wound on further to the front
• To the rear: The hook thread will be wound on further to the rear
②
(2) - Hook thread guide
Service Instructions 867-M PREMIUM - 03.0 - 05/2017
Winder