Calling Up The Service Routine - Dürkopp Adler 867-M PREMIUM Service Instructions Manual

3.3 Calling up the service routine

The machine must remain switched on for the following settings, as switch-
ing off will delete the required programmed values:
Call up the corresponding service routine to be able to make settings on
the active machine without any risk. In the service routine, the machine
moves to the correct position and the power is switched off as soon as the
Service Stop button is pressed. The settings are preprogrammed and
changes are not possible.
To call up the service routine:
1. Switch on the machine.
2. Press the P and S buttons at the same time.
3. Input the password (25483).
 The service menu is active.
4. Select the required service routine in the Service > Adjustments
Adjustments
Feed Dog
Needle Hook
Stroke
5. Confirm with OK.
 The display shows all the values set in the selected service routine.
14
• Disassembling and assembling the feed dog
• Setting the feed dog
• Setting the feed dog feed movement
• Aligning the needle bar linkage
• Setting the loop stroke position
• Setting the needle bar height
• Setting an even sewing foot stroke
• Setting the stroke movement for the feeding foot
menu item.
Assemble (assembling and removing feed dog)
PosToNeedle (setting the feed dog)
Feed Dog Move (setting the feed dog feed movement)
Timing (setting the loop stroke position)
Needlebar (setting the needle bar)
Equal Stroke (setting an even sewing foot stroke)
Feed Move (setting the feeding foot feed movement)
Service Instructions 867-M PREMIUM - 03.0 - 05/2017
Working basis