Short Thread Cutter - Dürkopp Adler 867-M PREMIUM Service Instructions Manual

Short thread cutter

16 Short thread cutter
Order
Correct setup of the short thread cutter requires that the necessary work
steps be performed in the order given in this chapter.
Cover
Service Instructions 867-M PREMIUM - 03.0 - 05/2017
WARNING
Risk of injury from sharp and moving parts!
Cutting and crushing possible.
Switch off the machine before setting the short
thread cutter.
NOTICE
Property damage may occur!
Damage to the machine from missing thread-pulling knife.
Risk of breakage.
The reverse-motion lock for the bobbin case is on the thread-pulling
knife.
Use the machine only with a fitted thread-pulling knife.
• Open the throat plate slide ( p. 20)
• Disassemble the throat plate ( p. 21)
• Remove the feed dog ( p. 22)
75