Pm Parts Settings; Before Removing The Old Pm Parts - Ricoh M022 Service Manual

3. Preventive Maintenance

PM Parts Settings

Before Removing the Old PM Parts

1. Enter the SP mode.
2. Output the SMC logging data with SP5-990-004.
3. Set the following SPs to "1" before you turn the power off. Then, the machine will reset the PM counters
3
automatically. In the case of developer, the developer initialization will also be done automatically.
4. Exit the SP mode.
Development unit
PCU
Fusing unit
Fusing roller
Fusing belt
Image Transfer Belt Unit
Image Transfer Belt Cleaning Unit
Paper Transfer Roller Unit
Waste Toner Bottle (if not full or near-full)
For the following units, there is a new unit detection mechanism. It is not necessary to reset PM counters.
• PCDU
• Image Transfer Belt Unit
• Fusing unit
128
CÓPIA NÃO CONTROLADA
Item
CÓPIA NÃO CONTROLADA
SP
Black: 3902-001
Cyan: 3902-002
Magenta: 3902-003
Yellow: 3902-004
Black: 3902-009
Cyan: 3902-0010
Magenta: 3902-011
Yellow: 3902-012
3902-014
3902-015
3902-016
3902-013
3902-017
3902-018
3902-020