Sp Mode And Up Mode Settings For Ieee 802.11 A/G Wireless Lan - Ricoh MP 7503SP Field Service Manual

• Range: 1-11 channels (default: 11)
• In some countries, only the following channels are available:
• The allowed range for the channel settings may vary for different countries.
8. WEP (Encryption) Setting. The WEP (Wired Equivalent Privacy) setting is designed to protect
wireless data transmission. The same WEP key is required on the receiving side in order to unlock
encoded data. There are 64 bit and 128 bit WEP keys.
WEP:
Selects "Active" or "Inactive" ("Inactive" is default.).
Range of Allowed Settings:
• 64 bit: 10 characters
• 128 bit: 26 characters
9. Press "Return to Default" to initialize the wireless LAN settings.
Press "Yes" to initialize the following settings:
• Transmission mode
• Channel
• Transmission Speed
• WEP
• SSID
• WEP Key

SP Mode and UP Mode Settings for IEEE 802.11 a/g Wireless LAN

The following SP commands and UP modes can be set for IEEE 802.11 a/g.
SP No.
5840-008 Transmission speed Sets the transmission speed
5840-011 WEP Key Select
UP mode Name
SSID
Name
Auto, 54 Mbps, 48 Mbps, 36 Mbps, 24 Mbps,
18 Mbps, 12 Mbps, 9 Mbps, 6 Mbps,
11 Mbps, 5.5 Mbps, 2 Mbps, 1 Mbps (default: Auto)
Used to select the WEP key (Default: 00).
Function
Used to confirm the current SSID setting.
IEEE 802.11 a/g/n Interface Unit M19
Function
387