Power Pack+ Models; 8/8 And 8/24 San Switch Features; Port Side Of The 8/8 And 8/24 San Switch - HP StorageWorks 8/40 - SAN Switch Hardware Reference Manual

Storageworks 8-gb san switch series
Hide thumbs Also See for StorageWorks 8/40 - SAN Switch:
Table of Contents

Advertisement

Power Pack+ models

All 8-Gb SAN Switch Power Pack+ models ship with these licensed options:
NOTE:
The HP StorageWorks 2408 FCoE Power Pack+ Converged Network Switch does not include Adaptive
Networking or Extended Fabric.
Adaptive Networking
Fabric Watch
Advanced Performance Monitor
Extended Fabric
ISL Trunking
For detailed information on these features, see the HP StorageWorks Fabric OS administrator guide
for the firmware version you are running.

8/8 and 8/24 SAN Switch features

Functions as an edge device in fabrics of up to 239 switches.
Integrates a single motherboard design with 667 MHz PowerPC 440EPx Reduced Instruction Set
Computer (RISC) CPU and integrated peripherals which provide high performance.
Provides the EZSwitch Setup Wizard for easy setup and basic configuration.
Provides on-demand scaling of 8 to 24 ports.
Operates as a fully functional switch or an N_Port ID Virtualization (NPIV) Access Gateway (with
all ports licensed only).
Integrates a single motherboard design with a 667 MHz PowerPC 440EPx Reduced Instruction
Set Computer (RISC) CPU with integrated peripherals.
Integrates Inter-Switch Link (ISL) Trunking (requires an optional license) and enables up to eight
ports between a pair of switches to be combined to form a single, logical ISL switch with a speed
of up to 64 Gb/s (128 Gb/s full duplex) for optimal bandwidth utilization and load balancing.
Provides Dynamic Path Selection (DPS), which optimizes fabric-wide performance and load balan-
cing by automatically routing data to the most efficient available path in the fabric.
Provides universal ports that self-configure as E_Ports, F_Ports, M_Ports, or FL_Ports.

Port side of the 8/8 and 8/24 SAN Switch

The port side of the 8/8 and 8/24 SAN Switch includes the system status LED, console port, Ethernet
port, USB port, and FC ports with corresponding port status LEDs. Additionally, a pull-out tab identifies
the serial number, MAC address, and World Wide Name (WWN). Record the switch IP address on
the pull-out tab for easy access.
Figure 1
shows the port side of the 8/8 and 8/24 SAN Switch.
8-Gb SAN Switch hardware reference manual
17

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents