Replacing The Chassis Door; Attaching Port Side Of Chassis To Rack Rails - HP A7533A - Brocade 4Gb SAN Switch Base Hardware Reference Manual
Hp storageworks dc and dc04 san backbone director switches hardware reference guide (5697-7814, february 2009)
Hide thumbs
Also See for A7533A - Brocade 4Gb SAN Switch Base:
- Administrator's manual (576 pages) ,
- User manual (248 pages) ,
- Release note (76 pages)
Table of Contents
Advertisement
Figure 7 Attaching port side of chassis to rack rails
Replacing the chassis door
To reinstall the chassis door:
NOTE:
The door is not hinged. It installs on the chassis by snapping the four ball studs located on the chassis
into the receiving hardware on the door.
1.
Align the eight ball studs on the chassis with mounting hardware locations on the chassis door
while pushing the door straight into the chassis.
2.
Snap the door into place over the ball studs (see
40
DC SAN Director Installation
Figure 8
and
Figure
9).
26423a
Advertisement
Table of Contents
