Entering The Logging Menu - GE PM880 Operations & Installation Manual

August 2003

Entering the Logging Menu

To enter the Logging Menu, press the
right of the PM880 keypad. The Main Menu replaces the Status
Bar at the top of the screen. Press the [ ] arrow key three times
to scroll from the Site Menu to the Logging Menu. At the
Logging Menu, press
Figure 7-1 below. Refer to Figure B-5 on page B-5 of Appendix
B, Menu Maps.
Site Program Meter
Dew Point, °C
K
K
Pressure, PSIg
K
About
Figure 7-1: The Logging Menu
To scroll to a particular option, press the [
until you reach the option. Then press
window.
When entering parameters in an option, press:
•
The [ ] key to step through the available parameters
•
The [ ] key to scroll back to a previously entered parameter
•
The key (Cancel) or the
[F2]
time and return to Operate Mode without changing the
parameters.
7-2
. The screen appears similar to
[ENTER]
70
-52.0
-30
55.00
0
[ESC]
key at the lower
[MENU]
Logging Service
Temperature, °C
Log Manager
New Log
10 Minutes
Run Time, Hours
10.0
6
] or [
to open the option
[ENTER]
key to exit an option at any
23.0
12
] arrow keys
Logging Data