Table of Contents
Advertisement
TrafficView Version 1.00
4.10.6 Files
In this menu user can transfer files between SD card and TrafficView.
User can load waypoints and airspaces. Only one waypoint or airspace file can be loaded
in TrafficView. TrafficView is capable of downloading IGC flight from connected Flarm
device and storing it on micro SD card. IGC files stored on micro SD card can be converted
to KML file format, which can be viewed on Google Earth. FlarmNet files can be also
loaded to TrafficView.
Downloading flight data works only with Flarm devices. PowerFlarm is not able to
send flight to TrafficView.
4.10.7 Units
Units for distance, speed, vertical speed, altitude, latitude and longitude format can
be set in this menu. In this menu we can set also an UTC offset.
4.10.8 Password
There are several passwords which run specific procedures as listed below:
00666
Resets all settings on TrafficView to factory default
•
99999
•
Will erase all data on Flarm device
30000
Will delete Flarmnet user file on TrafficView
•
4.10.9 About
In the about screen there is information about the firmware version of the TrafficView and
the its serial number.
4.10.10
Exit setup
When pressing this item, we will exit from this setup menu to one level higher. Same can be
done with pressing the middle push button.
Page 17 of 22
August 2019
Advertisement
Table of Contents
