Header Customization; Setup - LXNAV LX Zeus Mobile User Manual

Vertical distance from airspace
Arrival altitude
Estimated time en route
Current efficiency TP/APT/Task
Required efficiency TP/APT/Task
Track TP/APT/Task
Bearing TP/APT/Task
Radial TP/APT
Compass heading
Digital clock
Analog clock
Flying time
ETA (current speed) TP/APT/Task
ETA (average speed) TP/APT/Task
ETA (MacCready speed) TP/APT/Task
GPS position
Battery
GPS signal
To terminate the process, press the volume button.
There is infinite number of bottom rows available, selectable with 1-4 push button. To create a new row
simply move the frame to the last position, press 1-4 and a new row will open. The display configuration
may consist of one, two or three bottom rows. See Setup/Layout for details.
1.7.1.3

Header customization

Customization of the header should be done in the similar way as by bottom row. After a long press on
volume the customization can start. Size of indicators can be adjusted by rotating Volume button. Box
types can be selected after press on Zoom button. Rotating the zoom button will give the option to select
the position for the indicator.

2 Setup

Setup menu is available after short press on SETUP
labelled push button. The menu is divided into two
sections (Pilot and System settings). System settings
are settings that are valid for the whole system and are
not pilot specific data. Pilot connected items may vary
from pilot to pilot and depend on individual requirements.
Suitable symbols with text will help you to find the menu
of interest.
use Zoom button and rotate it to find out menu of
interest (selected menu size will increase)
use push function of Zoom to enter menu.
LX Zeus v 3.0 25.6.2014
- 19 -