Updating Via Wi-Fi Module - LXNAV LX90 Series Manual

Rev #1
Please note that the update file and update code are a matching pair only
applicable to a particular serial number.
Once the update file is verified the main display unit will reboot and the new firmware is
ready for use.
After the first reboot the main display unit will also update all devices connected to the 485
bus. On average this update will take approximately five minutes.
7.1.1

Updating Via Wi-Fi Module

With the SW version 6.0 onwards it is also possible to perform an update without a SD card
or USB stick. Once the Internet connection is established, the system will automatically give
you a notification that there is a new update available. The user has 3 options available
update – which will perform the update, ignore – this message will be ignored and it won't
be shown anymore for this version and later option – which will notify you after each
restart.
The update button will download the version, make an update and display a message
"update successful" After that the system will perform a restart. The user will also be asked
to make an update of peripheral devices. We suggest you to confirm it and update all
devices.
Version 7.10
Page 132 of 145
January 2020