LX9000 Version 2.6
9
Firmware Update
Firmware updates of the LX9000, V5 vario unit or vario indicator can be easily carried out
using the SD Card. Please visit our webpage
firmware update.
You can also subscribe to a newsletter to receive news about the LX9000 automatically.
9.1 Updating LX9000 firmware
We will send you an update file and update code. The update code is a string six letters
long and the update file has the .lx9000 extension. To proceed with the firmware update
copy the update file to a SD card or USB stick and insert it into the LX9000.
Start the LX9000 and go to the Setup->Password menu option.
Enter password 89891 and press ENTER.
The LX9000 will automatically search for an update file. If more than one update file is
found a selection dialogue will appear.
After the update file is selected an update code must be entered.
Enter the update code which was sent to you.
Please note that the update file and update code are a matching pair only
applicable to a particular serial number.
www.lxnav.com
Page 111 of 130
September 2011
and send us a request for the