2.8 Setting the Password
2.8 Setting the Password
The handset/desk phone password is not set by default. You must register a handset/
desk phone password (4 digits) before use. You cannot use the following features
without setting a password:
• Contacts lock (See 7.2.6 Locking the Local Contacts, page 92).
• "Manual&Password" or "Auto&Password" for "Key Lock Type" (See Key Option, page
133).
• Initialize Handset (See Other Option, page 142).
Note
• To avoid unauthorized access to this product:
–Set a password that is random and cannot be easily guessed.
–Change the password regularly.
• Make a note of the password so that you will not forget it.
To set
[In standby mode]
1.
/[CENTER]
2.
[ ]/[ ]: "Phone Settings"
3.
[ ]/[ ]: "Other Option"
4.
[ ]/[ ]: "Change Password"
5.
Enter a new password (4 digits [0–9]).
6.
Verify the password by entering it again as in step 1.
The administrator password may be required for this setting. Contact your
*1
administrator for further information. For available characters, see "10.1.2 Character
Table for Administrator Password", page 124.
2.9 Key Lock
You can lock all keys other than the Navigator Key while the handset is in standby mode
or out of range. One of 4 key lock types can be selected. For details, see Key Option,
page 133.
Note
• If you select "Manual&Password" or "Auto&Password" for "Key Lock Type", you need to
enter the password to unlock the handset/desk phone.
If you enter an incorrect password 3 times, you cannot enter another password for
approximately 30 seconds.
54
/[CENTER]
/[CENTER]
/[CENTER]
*1