Marker Format; Searching With Markers - Keysight N9912A User Manual

Data Analysis Features
All about Markers

Marker Format

The Marker Format setting allows you to choose the format of the marker
readout that appears in the upper-right corner of the screen and in the marker
table. The marker format can be independent of the trace format, and can be
set independently for each trace. All markers on a trace have the same marker
format.
How to choose marker format
— Press Marker.
— Then More.
— Then
— Then choose from the following:
Selection
Default
R + jX
(3rd number is distance for Time Domain)
Z Magnitude
Phase
Real
More
Imaginary
Mag & Phase
There are more trace formats available than marker formats. To display marker
readouts in more formats than are shown here, change the trace format, then
select Default. Learn how to change format in

Searching with Markers

Marker Searches are used to move markers to locations on the trace which
exhibits the characteristics of the search criteria. Learn
page
Keysight N9912-90001 User's Guide
— When a marker is moved to a 'blank' trace (not visible) the marker
moves to the same X-axis position at either the Y-axis position of the
last data, or to the ZERO position.
Marker Format.
Same as displayed format
Complex impedance format
Impedance Mag.
16-10.
Example Y-axis value
22.8Ω -j61.4Ω
287.9fF
66.08Ω
73.8°
0.2003
-0.6727
0.705, -73.7°
"Format" on page
"What Is a 'Peak'" on
5-7.
16- 7