Marker Settings; Amplitude Markers - Keysight N9912A User Manual

Pulse Measurements Mode – Option 330
Pulse Measurement Settings

Marker Settings

Markers are not allowed with Meter-style measurements.
Markers are displayed on Tr 1 and also on the zoom trace if the marker is
within the zoom window time span.
Up to six standard markers can be used to provide readouts of the Y-axis
amplitude at the current X-axis location.
The six standard markers can also be used as Delta Markers.
Learn more about standard markers in

Amplitude Markers

Amplitude markers are horizontal dotted lines that you can move to any
amplitude level on the screen. The two amplitude markers can be set
independently or used as a pair of delta markers.
Amplitude markers can be used as a visual comparison aid with the pulse
measurement traces.
How to make Amplitude Marker settings
— Press Marker.
— Then More.
— Then
— Then choose from the following:
— Then
— Enter a value in dBm for the marker using the numeric keypad, the
arrows, or the rotary knob.
Keysight N9912-90001 User's Guide
Ampl Markers.
— OFF Amplitude markers are NOT displayed.
— ON Amplitude markers ARE displayed at their previous positions.
Ampl Mkr 1 or 2.
"All about Markers" on page 16-2.
13- 11