Line Loss And Velocity Factor - Keysight N9912A User Manual

Time Domain – Option 010
Time Domain (Transform) Settings
The Window setting applies to ALL traces.
How to make Window setting
— Press Measure 4.
— Then Transform.
— Then More.
— Then
— A settings table appears that allows you to navigate and select the
following settings. These settings are made exactly like those made on the
Transform Settings table. Learn how in
page
Any of the following four methods can be used to make this same Window
setting. Impulse Width values are calculated from the frequency span and
Kaiser Beta value.

Line Loss and Velocity Factor

By default, the FieldFox does NOT correct Time Domain measurements to
account for the inherent loss of a cable. However, to make more accurate
measurements, Line Loss and Velocity Factor should be considered.
Keysight N9912-90001 User's Guide
Transform Window.
6-4.
1. Window
2. Percent
3. Kaiser Beta
4. Impulse Width
"Transform Settings Table" on
Min Medium
0 50
0 6.50
100.455 ps 168.501 ps
Max
100
13.00
231.284 ps
6- 7