Channel Scanner (SA Only and Option 312)
How to Set Up Channel Scanner
Figure 15-1
Display Example: Measure 5 Channels Spaced 2 MHz Apart
How to Set Up Channel Scanner
This section briefly reviews the steps in setting up a channel scan
measurement. If you are not familiar with this process or would like more
information, refer to
1. Define some channels (refer to
2. Select
3. Modify scale and specify color bar coding—Modify the scale and assign
2
"How to Define a Channel and Use Channel
Scanner").
a. Select a
Scan
Mode—choose:
—
Range
Specify total channels, channel spacing or
—
Custom List
b. Then modify channels based on the selected scan mode
Display
Type—choose:
—
Bar ChartV
or
—
Bar ChartH
or
—
Channel Pow
or
—
Strip Chart
or
—
Chart Overlay
or
—
Scan&Listen
colors to low and high power channels (bars):
"How to Define a Channel and Use Channel
Specify a list of channels from an editor
Keysight N9912-90001 User's Guide
Scanner".