Time Domain - Option 010 - Keysight N9912A User Manual

Keysight Handheld Analyzers
N9912A User's Guide
6 Time Domain – Option 010
With NA Mode, Time Domain Reflectometry (Opt 010), frequency information is
used to calculate and display measurements with time as the horizontal
display axis. The response values appear separated in time allowing a different
perspective of the test device's performance and limitations.
NA Mode settings that are NOT unique to Time Domain are documented in
Chapter 5, "NA (Network Analyzer) Mode", on page
In This Chapter
"Overview" on page 6-3
Time Domain (Transform) Settings
"Transform Settings Table" on page 6-4
"Frequency Range and Points" on page 6-4
"Stimulus (Mode)" on page 6-5
"Set Frequency Lowpass" on page 6-5
"Start/Stop Time" on page 6-5
"Distance Units" on page 6-6
"Window Layout" on page 6-6
"Transform Window" on page 6-6
"Line Loss and Velocity Factor" on page 6-7
"Data Chain" on page 6-8
Trace Settings
"Transform Enable" on page 6-9
"Gate Enable" on page 6-9
6- 1
5-1.