Table of Contents
Advertisement
Data Analysis Features
All about Markers
How to move a marker between data and memory traces
— Create a data and memory trace that will host the marker. Learn how in
— Press Marker and Enter to create a marker.
— Then More.
— Then select the marker to move using
— Then toggle
Marker Format
The Marker Format setting, available ONLY in NA Mode, allows you to choose
the format of the marker readout that appears in the upper-right corner of the
screen and in the marker table. The marker format can be independent of the
trace format, and can be set independently for each trace. All markers on a
trace have the same marker format.
How to choose marker format
— Press Marker
— Then
— Then
— Then choose from the following:
Selection
Default
R + jX
(3rd number is distance for Time Domain)
Z Magnitude
Phase
Real
More
Imaginary
Mag & Phase
178
"How to display data and memory traces" on page
Marker Trace Auto Data
—Auto - Marker resides on data trace when it is visible. Marker resides
on memory trace when only IT is visible (Default setting).
—Data - Marker resides on data trace, even when not visible.
—Mem - Marker resides on memory trace, even when not visible.
More
Marker Format
Same as displayed format
Complex impedance format
Impedance Mag.
189.
Marker
1,2,3,4,5,6.
Mem.
Example Y-axis value
22.8Ω -j61.4Ω
287.9fF
66.08Ω
73.8°
0.2003
-0.6727
0.705, -73.7°
Keysight N9923-90001 User's Guide
Advertisement
Table of Contents
