Gps - Keysight N9912A User Manual

System Settings
System Configuration
How to Install Options
A.lic file must already be on a USB Flash Drive. To learn how to obtain a.lic file,
visit:
Insert the USB Flash Drive in the FieldFox.
— Press System 7.
— Then
— Then Options.
— Then
— Press and hold the power button to shut down, then restart the FieldFox.
How to Delete ALL Options
Deleting individual options is NOT supported.
— Press System 7.
— Then
— Then Options.
— Then Advanced.
— Then
After a warning message, all options on the FieldFox are deleted.
Delete All CFG Options

GPS

GPS (Global Positioning System) allows you to 'stamp' each data trace with
your physical position in latitude/longitude/elevation format. This can be
useful when making measurements on cell towers or other antennas at remote
locations.
This feature is usable ONLY with the GPS receiver that is shipped with
Microsoft "Streets and Trips" and "AutoRoute" (versions 2010 and later).
The GPS receiver is NOT available from Keysight. Only the GPS USB
receiver is used with the FieldFox. Therefore, it is NOT necessary to
purchase the very latest version of the map software.
— GPS can be used in all FieldFox modes.
— Your GPS setting can be saved with Preferences. Learn more on
18- 12
http://www.keysight.com/find/softwarelicense
System Configuration.
Install Options The FieldFox reads, validates, then installs the options.
System Configuration.
Delete All Options.
is to be used by Service Personnel ONLY.
Keysight N9912-90001 User's Guide
page 18-7.