Manage Folders - Keysight N9912A User Manual

File Management
Saving and Recalling Files
— Then choose from the following:
For Copy File and Copy All Files, files are always copied to a subdirectory
titled Copy_<date.time stamp> of when the file was copied. For example,
"Copy_June.27.2013-00.40.47". A new subdirectory is created every time
a file is copied. Files can NOT be copied to other folders. To get a file to a
different folder, it must be saved to the specified folder.
— Copy
— Then select a device to copy the file to. Choose from Internal,
inserted), or
— Copy All File
copy the file to. Choose from Internal, USB (must be inserted), or SD Card
(must be inserted).
— Delete FIle
Insert only ONE USB Flash Drive in the FieldFox when saving or copying
files.

Manage Folders

You can create new folders, delete old folders, and select the active folder to
which files can be saved. The Parent folder [..] is listed when not in the root
directory.
Press Save/Recall
— Press Save/Recall 9.
— Then More.
— Then
— Then choose from the following:
17- 8
Select a file or files to copy.
SD Card (must be inserted).
All files that appear will be copied. Then select a device to
The selected file is deleted after a warning prompt is displayed.
Manage Folders.
— Change Folder Changes the active folder to which files can be saved.
The active device and current folder is displayed at the top of the
screen, and below, a list of files in that folder. Use the
highlight a folder within the current folder. Each time the Change
Folder softkey is pressed, the highlighted folder becomes the active
folder.
— Create Folder A new folder is created in the current folder. Select a
name for the new folder from one of the displayed keywords: You can
change these keywords using the following Ed it Keywords function.
Refer to "Edit Keywords" on page
USB
17-9.
Keysight N9912-90001 User's Guide
(must be
arrows to