Marker Format; Searching With Markers - Keysight N9923A FieldFox User Manual

Marker Format

The Marker Format setting, available ONLY in NA Mode, allows you to choose the
format of the marker readout that appears in the upper-right corner of the screen
and in the marker table. The marker format can be independent of the trace format,
and can be set independently for each trace. All markers on a trace have the same
marker format.
How to choose marker format
 Press Marker
 Then
 Then
 Then choose from the following:
To view other formats, change the trace format, then select Default. Learn how to
change format on page 26.

Searching with Markers

Marker Searches are used to move markers to locations on the trace which exhibit
the characteristics of the search criteria. Learn 'What is a Peak'' on page 117.
How to Search with Markers
The following menu structure applies to NA Mode. Keystrokes will be slightly
different for CAT and Pulse Measurements Modes.
 Activate the marker to move. Activate the marker to be used for the search (NOT
 Then press Mrk ->/Tools.
 Then
114
Data - Marker resides on data trace, even when not visible.
o
Mem - Marker resides on memory trace, even when not visible.
o
More
Marker Format
Selection
Same as displayed format
Default
Complex impedance format
R + jX
(3 number is distance for Time Domain)
rd
Impedance Mag.
Z Magnitude
Phase
Real
More
Imaginary
Mag & Phase
necessary with Bandwidth search.)
Marker Search
Example Y-axis value
22.8Ω -j61.4Ω
287.9fF
66.08Ω
73.8°
0.2003
-0.6727
0.705, -73.7°
FieldFox User's Guide