Independent Source - Keysight N9912A User Manual

SA (Spectrum Analyzer) Mode
SA Mode Settings
Listen Time
While Tune & Listen is actively demodulating a signal, the SA does not sweep
and update the display. Listen Time sets the amount of time that the FieldFox
demodulates, then stops to perform a single sweep and update the display,
then again demodulates.
To select Listen Time:
— Press Meas Setup 4.
— Then
— Enter a value using the numeric keypad,
Then select a multiplier key. Learn more in
page
Volume Control
To increase or decrease the Volume of the demodulated signal:
— Press Meas Setup 4.
— Then Volume.
— Enter a value in percent between 0 and 100 (loudest) using the numeric
keypad,
— Volume can also be changed and easily muted from the System menu.
Learn more in
Demod ON and OFF
To quickly stop the audio demodulation and perform only the normal SA
sweeps, select the following:
— Press Meas Setup 4.
— Then

Independent Source

For best results, when using the independent source feature, the battery
saver features should be turned off. Refer to "Setting the Battery Saver to
OFF" on
A tracking generator, a popular option with Spectrum Analyzers, is a source
which always tracks the SA receiver.
Like a traditional tracking generator, the Independent Source feature can set
the internal FieldFox source to track the SA receiver frequency range. It can
also set the internal source to a CW frequency that is independent of the SA
frequency.
8- 18
Listen Time.
2-14.
arrows, or the rotary knob.
"How to set FieldFox Volume Control" on page 5
Demod ON OFF.
page 8-20 and to "Preferences" on page
arrows, or the rotary knob.
"Multiplier Abbreviations" on
.
18-7.
Keysight N9912-90001 User's Guide