Service Diagnostics; System Information - Keysight N9912A User Manual

System Settings

Service Diagnostics

— A message is displayed: "This option will COMPLETELY ERASE
— Then
— Then choose either
Service Diagnostics
— The Service diagnostics menu is generally used to display service-related

System Information

The System information table shows important information about your
FieldFox. The following is the most useful information:
— Model Number – FieldFox model
— Serial Number – Identification number of your FieldFox
— Firmware Release – The currently installed version of software. Check to
— Network Identity – The network name and current IP address of your
— Reflectometer Factory Cal - The Factory (CalReady) Calibration shows the
Event Log
The Event Log shows the information that has appeared on the FieldFox
screen. The most recent information is at the top of the table.
Press
Battery
Learn more in
20-1.
18- 22
existing user data. ARE YOU SURE?"
No to return to the previous menu without restoring files.
Or
Press Yes
SD Card
A progress bar and a message is displayed: "Restoring user data..."
information. To access these menu items, press System 7 then
Diagnostics.
see if you have the latest firmware at:
www.keysight.com/find/fieldfoxsupport
FieldFox.
date and time that the factory cal was performed for each test port and the
Thru connection. The format is P1 <date time>, P2 <date time>, P1-P2
<date time>. The factory calibration is updated when you send your
FieldFox to Keysight for Instrument Calibration. Learn more in
Calibration" on page C-4.
Clear Events
to erase this information.
Chapter 20, "Working with the Lithium-Ion Battery", on page
or USB
Keysight N9912-90001 User's Guide
Service
"Instrument