Top Panel; Side Panel - Keysight N9912A User Manual

Preparing for Initial Use of Your New FieldFox
Take the FieldFox Tour

Top Panel

Caption Descriptions
RF Output For CAT and NA measurements, use to make reflection measurements.
Maximum: ±50 VDC, +23 dBm RF
Ext Trig/Ext External Reference connector to connect to an external frequecny reference.
Ref Maximum: 5.5 VDC.
RF In For CAT and NA mode, use to make transmission measurements.
For SA use to make all measurements.
Maximum: ±50 VDC, +27 dBm RF.

Side Panel

Connector Description
Ethernet cable connector to read trace data using the FieldFox Data Link
Software and connect to the FieldFox remotely.
Download the latest version of the software at:
www.keysight.com/find/fieldfoxsupport
On the N9912A units with serial number prefixes ≥5607, the mini-USB port
can be connected to your PC's standard USB port to send SCPI commands.
2- 10
Learn More:
"CAT Mode Settings"
on page 3-3
"NA Mode Settings" on
page 5-3
"SA Mode Settings" on
page 8-4
"Frequency Reference
Source" on page 18-15
"Triggering" on page
8-25
Learn More
Chapter 19, "Using
the Mini-USB Port
to send SCPI
Commands and
Queries (N9912A
units with serial
number prefixes
≥5607 Only)", on
page 19-1
Keysight N9912-90001 User's Guide