Calibration For Na, Cat, And Vvm Modes - Keysight N9912A User Manual

Keysight Handheld Analyzers
N9912A User's Guide
7

Calibration for NA, CAT, and VVM Modes

Calibration removes the systematic errors that are associated with
measurements in NA, CAT, and VVM Modes. Key presses are identical in all of
these Modes.
In this Chapter
"Why and When to Calibrate" on page 7-2
"Definitions" on page 7-2
"Preset Calibration (also known as CalReady)" on
page 7-3
"QuickCal" on page 7-3
"O, S, L Cal" on page 7-5
"Normalize" on page 7-6
"Compatible Mode Calibrations" on page 7-8
"Compatible 1-port and 2-port Calibrations" on
page 7-8
"Save the Calibration" on page 7-9
"Verify a Calibration" on page 7-10
"Calibration Method Summary" on page 7-11
ECal and Waveguide Calibrations are NOT supported on the N9912A.
See Also
Learn How to Make 75 ohm Measurements at the FieldFox Supplemental
Online Help:
http://na.support.keysight.com/fieldfox/help/SupHelp/FieldFox.htm
7- 1