Table of Contents
Advertisement
Pulse Measurements Mode – Option 330
Pulse Measurement Settings
Marker Settings
Markers are not allowed with Meter-style measurements.
Markers are displayed on Tr 1 and also on the zoom trace if the marker is
within the zoom window time span.
Up to six standard markers can be used to provide readouts of the Y-axis
amplitude at the current X-axis location.
The six standard markers can also be used as Delta Markers.
Learn more about standard markers in
Amplitude Markers
Amplitude markers are horizontal dotted lines that you can move to any
amplitude level on the screen. The two amplitude markers can be set
independently or used as a pair of delta markers.
Amplitude markers can be used as a visual comparison aid with the pulse
measurement traces.
How to make Amplitude Marker settings
— Press Marker
— Then
— Then
— Then choose from the following:
— Then
— Enter a value in dBm for the marker using the numeric keypad, the
Keysight N9923-90001 User's Guide
More
Ampl Markers
OFF
—
Amplitude markers are NOT displayed.
—
ON
Amplitude markers ARE displayed at their previous positions.
Ampl Mkr 1 or 2
arrows, or the rotary knob.
"All about Markers" on page
174.
155
Advertisement
Table of Contents
