Cruise Control Actuator Test - Honda Civic 2002-2003 Service Manual

Cruise Control Actuator Test
1. Disconnect the 4P connector (A) from the cruise
control actuator (8).
B
Terminal side of
male terminals
2. Remove the cover (A), and check the output linkage
(8) for smooth movement.
3. Connect battery power to the No.2 terminal and
ground to the NO.1 terminal.
4. Check for a clicking sound from the magnetic clutch.
The output linkage should be locked.
5. If the output linkage is not locked, replace the
cruise control actuator assembly.
6. Check the operation of the actuator motor in each
output linkage position according to the table. You
should be able to hear thE> motor.
Battery power
Output linkage position
~olarities
FUL~
~'
'(-)
FULL
MIDDLE
, CLOSE
POSITION OPEN
No.4 No.3 The
, The The
Terminal Terminal motor
I
motor motor
runs, runs.
stops.
No.3 No.4 The The The
Terminal I Terminal
motor motor motor
staas.
runs. runs.
OUTPUT LINKAGE
FULL OPEN ,.
~ " ,
,
'.
/
-'
.'
FULL CLOSE
7. If the actuator motor does not operate as specified,
replace the cruise control actuator assembly.
4-43